How to connect DVD to TV

Often when buying DVD there are problems with connecting the device to the TV. Experts recommend when buying equipment to pay attention to how to connect it to the TV, as some models do not fit all types of TVs, and need special connectors and adapters for connection. How to connect a DVD to a TV?

Connecting a new DVD to your TV is easy. To get started, read the instructions that came with the device in detail. Then you should study the components. Usually in a box there are 1-2 types of cables for connection. Explore the connectors on the TV and DVD. Then follow the instructions below:

  1. Turn off all devices from the network.
  2. Remove the RCA, HDMI or SCART wire (depending on which is included) from the box.
  3. Connect one part of the cable to the TV, and the second to the DVD.
  4. Turn on the TV, and after the second device.
  5. In the settings, select the DVD playback format.
  6. All is ready.

Then you can safely insert discs into the video player and enjoy watching movies.

Important! If the kit comes with only one cord and it does not fit the TV, you will need an adapter or an additional cord, which can be bought at an electronics store.

Inspection of connectors and wires, mapping

To understand how to connect one device to another, you need to study in detail the available connectors. In modern models, the following types are available:

  • HDMI There is only in modern models, a great option for viewing content in good quality. The connector allows you to transfer sound and video to the big screen.
  • RCA The most common option, which is in both old and modern models. This connector is also called a tulip, as it consists of three-color sockets, each of which is responsible for the transmission of sound and video.
  • SCART. It is quite rare in modern DVD models. It is connected only using a special adapter.
  • S-video. It is used extremely rarely, if only the above options for some reason do not work. This connector allows you to display only the image. To play sound, you need an additional output under the speakers.

Remember! There are no hopeless situations, so if one of the connectors does not fit, you can always try the other option or use the adapter.

What adapters, wires may be needed

If you can’t connect the DVD via the bundled wire. You can always use the adapter. In the store you should buy switch to the antenna connector. Through it, you can connect the DVD cable to the TV.

An RF (RF) unit may also come in handy. It comes complete with old consoles. Therefore, if the old Sega or Dendy is lying around at home, the block can be taken from them.

Wiring diagram

First of all, inspect the box kit. Usually along with the DVD comes the RCA cable, or as it is also called "bells." The cord has three branches of red, white and yellow (the first two are responsible for the sound, the last for the image).

Find the connectors on the TV. Now you need to insert the plugs by color into the TV and DVD. The device is ready, you can include your favorite movie on discs, and enjoy a pleasant viewing.

To connect the DVD to the old TV you will need a special cable and adapter. The algorithm of actions is as follows:

  1. Examine the contents of the box. See which wire comes in the kit.
  2. If there is a SCART wire with wide connectors. Then you can safely use it.
  3. You need to insert one plug into the TV, and the second into the DVD into the corresponding connector.
  4. You can turn on the technique for watching a movie.

Sometimes it happens that the TV and video player do not have the same connectors. In this case, you will need an adapter. There are different types of conductors. Here you need to consider the available connectors on the TV and DVD.

Types of connectors for old TVs that you will need to connect

Older TV models have fewer connectors. Usually they have two types of connection:

  • A / V for 3 color sockets.
  • Component with five color plugs.

Usually, modern DVD models can only be connected to an old TV using an adapter cable. After all, modern options are equipped with an HDMI connector, which is easy to connect.

Connecting one technique to another is easy. The main thing is to follow the instructions and insert plugs correctly. Remember that all wires must be inserted only into connectors of the same color or the same parameters. DVD player allows you to view your favorite movies on the big screen and enjoy surround sound, good video quality.

Watch the video: HOW TO Hook up Your DVD Player (March 2024).

Leave Your Comment