Which stabilizer is best for a gas boiler

Nowadays, fortunately, there are no problems with the choice of this device. On the contrary, the assortment is diverse and wide. But a small problem arises from this fact - then which one to choose? In the written article, we will try to figure out which device to purchase for what purposes.

Why do I need a voltage regulator for a gas boiler

Of course, you need to understand for what it is worth buying a unit. Modern models easily overcome periodic fluctuations in the voltage network. This ensures the protection of the boiler, especially at the time of significant surges. If installation is not completed on time and interruptions occur, then critical consequences are possible. For example, a breakdown of the whole structure. And since it is gas, this is a consequence of poisoning due to natural or carbon monoxide. In addition, there is a high probability of an explosion or the appearance of a fire. As a result, we can conclude that the stabilizer guarantees safe operation.

Overview of Voltage Regulators

Consider the main structures that are in great demand among buyers in the market.

DAEWOO POWER PRODUCTS. It is a budget option, in which the price perfectly matches the quality. It is equipped with a high efficiency, namely 95 percent. Do not forget about a fairly decent power - one kW and about a wide range of drops - from 140 to 270 V. In addition to the above, the device is equipped with protection from overheating and interference. As for the appearance, it is a compact unit that does not take up much space.

LIDER is a brand popular for its high power ratings of 30,000 VA. The voltage range is from 150 to 265 V. Users of this device respond very well and emphasize its process of operation in silent execution. However, for such an extensive range of advantages, you will have to pay a considerable sum of money.

ENERGY. It differs from many manufacturers in that it is made by local enterprises. An electronic stabilization system is provided, the level of which is 5%. And the reaction rate to jumps is 20 m / s.

What voltage regulator 220V is needed for a gas boiler

Before starting the boiler, it is recommended to purchase a design that would save the boiler and extend its life. Typically, the boiler power consumption is oriented from two hundred to three hundred watts, therefore, the structure should have a used indicator in the range from four hundred watts. However, some people most often play it safe and buy the most powerful models. And there is nothing to worry about.

How to choose a stabilizer for a heating boiler

It is advisable to approach this issue with serious intentions, since the efficiency of working capacity will depend on it.

• Pay attention to the power of the device. If it is larger, then such a purchase can be considered unreasonable. This is because the full load will not be provided. In the case when a smaller indicator is selected, the opposite of the previous situation is formed - overload. For the most accurate calculation, add 30% to the boiler power that it consumes.
• The design must comply with optimum performance. To calculate it, you need to decide on the following indicators: time and speed. The first of them gives how many milliseconds the unit will respond to the signal. The second is how much the voltage correction will take.
• The accuracy of maintaining the output tear should be at least five percent. This will be enough for complete protection.
• Consider your personal preference when choosing a location: on the floor or on the wall. The connection method will depend on this.
• Pre-think and mount.

Which stabilizer is best for a gas heating boiler

First you need to select a type. They are relay, electronic and electromechanical. In the first and second version, there are from 4 to 20 autotransformer windings. It is thanks to them that the tension is balanced. As for accuracy, the first one is from 5 to 8%, and the second - from 2 to 3%.

But it is worth remembering that the heating is gas, this means the highest stability, even with a smaller run. Therefore, exclusively electronic are suitable. Their run-up is compared to 214-226 V. In addition, during operation you will not notice characteristic noises. The cost price of such an apparatus is high, but justified. It varies from 2500 rubles to 6000. The latter model is a completely different principle of activity. And with gas appliances nearby in the same room it is forbidden to put them because of the possible occurrence of sparking.