How to clean the kettle from scale with vinegar

In modern conditions, water quality often leaves much to be desired. If it contains a large number of salts of magnesium and calcium, this makes it hard. When boiling hard water, any kettle is covered with a lime coating.

The scale not only spoils the taste of the drink, the appearance of the kettle, but also increases the time it boils, because it covers the heating element. This means that electricity and gas costs are increasing.

Popular ways to clean your kettle with vinegar

If the kettle is not scaled with vinegar, it can either burn out or rust. It’s better not to delay cleaning, it takes a little time, but you will get an excellent result for little money.

How to clean the kettle with vinegar? The kettle can be cleaned of limescale by the means that are at hand in every home. Consider the most popular ways to clean the kettle at home.

Vinegar and cold water

Vinegar is the most affordable and widespread assistant in descaling household appliances. You can use either vinegar or vinegar essence. What's the Difference? Vinegar (table) is the most common solution of acetic acid, its concentration is 9%.

Acetic essence is also an acid solution, but the concentration of the substance here is impressive - usually 70%. Acetic acid per se is not common on the farm: it is a powder or solution with a concentration of 90%. For cleaning use the first or second option.

Important! Manufacturers of many electric kettles do not recommend using vinegar to remove scale due to its aggressiveness. In practice, a potent remedy is often indispensable. Try to follow these proportions when cleaning so as not to damage the equipment.

Pour 0.5 liters of water into the kettle. If you use 9% vinegar, then add about 150 ml (this is less than 1 cup), if vinegar essence, then one tablespoon will be enough. If your kettle has a large volume, then you can increase all components by 2. There are two options:

  1. First boil water and only then pour vinegar;
  2. Add vinegar, and then boil water.

The first option is preferable, but you can verify from experience which method suits you best. After boiling, leave the kettle to soak for 1-2 hours, periodically checking the state of scale. The coating can completely peel off itself or just loosen on the walls.

Then take a soft sponge and carefully rinse off the scale yourself. After doing the work, rinse the tank several times, because vinegar has a rather pungent odor.

Vinegar and ascorbic acid

In this method, in addition to vinegar, use ascorbic acid powder. Pour purified water into the kettle, filling it approximately two-thirds. Pour 2 tablespoons of ascorbic acid into the tank and pour two tablespoons of table vinegar (if only vinegar essence is available - use it in a minimal amount - about 1 teaspoon).

Boil the kettle, leave the solution for a while up to 10-12 hours. Typically, the scale leaves in the first couple of hours, so check the condition under the lid.

After processing, wash the kettle under running water and boil it 1-2 times to completely get rid of substances and unpleasant odors.

Three stages of boiling

How to clean the kettle from scale with vinegar? This method is suitable for situations where the plaque layer is very thick. Three-stage cleaning is the most aggressive for household appliances, so it should be used only in emergency situations.

Consider how to clean the kettle from scale with vinegar and soda:

  1. Fill the kettle with 1 liter of liquid, add 1 tablespoon of baking soda. Boil water. If the kettle is electric - boil water several times per hour, if for a stove - do not stop boiling for an hour;
  2. Descaling in a kettle with vinegar and soda is easy. Then drain the water and again fill in 1 liter of clean water, dissolve 1 tablespoon of citric acid powder. Repeat boiling for one hour. Rinse off the scale that has already dissolved;
  3. The final step will be to use approximately 100 ml of 9% vinegar or incomplete 1 tablespoon of vinegar essence and 1 liter of filtered water. Spend the last hour boiling. Rinse off any remaining scale with a sponge, rinse the kettle thoroughly or boil it with clean water.

Preventive actions

To clean the kettle with vinegar from scale in practice is quite difficult. However, you can adhere to a number of rules that will help you not to resort to cleaning for a long time or spend it less often than usual:

  1. Use clean, filtered water. You can use a filter in the form of a jug, a stationary filter, or buy water in bottles. When buying bottled water, pay attention to the label: its hardness is usually indicated on it (for example, up to 1.5 - the hardest, more than 9 - very hard). Choose soft or least hard water;
  2. Never boil the same water twice or more, it is better to replace it with a new one;
  3. Each time, rinse the kettle from white "flakes" formed during boiling;
  4. When flushing the tank, use gentle methods. Do not wash the kettle with hard metal sponges or abrasive products. They can damage the walls, as a result of which plaque quickly eats into scratches and microcracks, and the processes of rusting and destruction of enamel or plastic begin;
  5. With proper care, you can regularly use delicate cleaning methods, such as brine or fruit peeling, for prevention.

Now you know how to descale the kettle with vinegar. There is nothing complicated in the procedure.

Watch the video: How to Descale a Kettle Easy Household Cleaning Ideas That Save Time & Money Clean My Space (March 2024).

Leave Your Comment