How to turn on bluetooth on Windows laptop

Nowadays, such a built-in module, like bluetooth, can be found less and less on a laptop. This is due to the fact that wifi gradually replaces it through its own popularity. But do not forget about the equipment in which it still remains. Users of such models need to possess knowledge about the inclusion and use of bluetooth. In the same article, you will learn not only ways to activate, but also address possible obstacles that may appear on the way.

How to turn on Bluetooth on a laptop

Depending on the operating system, the procedure may be different. Therefore, for each of them it makes sense to consider its own sequence of steps.

Windows 7. Before starting the main process, it is recommended to make a check. It is an installation of drivers and auxiliary utilities. With their absence, the object will not work. It is also important to mention where you can download the appropriate program. In the configuration, a disk with software is usually attached to each device. But it is likely that you have lost it or not found. In this case, you will have to go to the official site and also set up the software.

Now, after the search for new equipment is reproduced, you can see it in the device manager. To deploy the service, you need to hold down the "start" + "R" combination. In the window that opens, you must enter "mmc.devmgmt.msc", and then click on "enter". From now on you have a list from which you need to select "bluetooth radio modules" and "network adapters". Clicking on the named lines using the right mouse button, you can either activate or deactivate the function.

Attention! Thanks to the "hot" buttons, you can also bring an adapter into use.

We are talking about clamping Fn together with F2, F5, F10. The installation model directly influences the choice of the last of the tools named. In addition, do not forget about the icon appeared offline module in the tray after setting the driver.

Windows 8. Due to the improved version of the OS, the course of events will be somewhat different from the previous version. So, the user should run the following algorithm:

First you need to open the panel on the right. The mouse pointer must be placed in such a way as to mark the line "parameters".
Then you can select "change computer settings" and go to the "wireless network" tab.
After carrying out the described manipulations, the area in which the indicators are usually regulated will be highlighted. Therefore, here you can both turn on and turn off work by moving the special part.

If you are the owner of the windows 8.1 OS, then the above steps are not suitable for use. You also have to expand the "start" section and also go to the window where it is possible to change the values. After that, it is important to choose "computer and devices", and then - bluetooth. Thus, the system will automatically begin to find open networks.

Windows 10. To activate such a part in modern versions of the OS, you need to start the execution of the list of steps:

Due to the menu mark, it will be necessary to get to the “device” layout through the “parameters”.
Now it is necessary to note the first of the proposed sections, namely “bluetooth and others ...”.
So, the slider can be moved to the desired position for you. In the case of activation will begin to independently find available accessories.
When the list is formed, you will have to mark the unit with which you want to interact.

If you have pre-installed the required programs, then in the system section you can find the product with the image of the adapter. Thanks to her, a person is able to use fast access. To do this, hold down the right side of the mouse and select the “go to parameters” item. Then the combination of two inventions will begin.

Why on a laptop bluetooth

As on conventional cell phones, tablets, and on notebooks, the specification performs the same role everywhere. This wireless contact technology is rare, but sometimes it reaches a radius of action as much as 100 meters. The speed assumes a gap of 3 to 24 Mbit per second. The adapter is used for the following purposes:

Information exchange between through equipment. So, it is possible to transfer various files in the form of video or audio from one computer to another source.
Connect the headset without a wire. The category includes not only mice, keyboards, but also a microphone and headphones.
Also, the main invention can be paired with a smartphone, while using the second one as a modem for contacting the Internet.

Of course, every year the technology is being upgraded. Therefore, we can distinguish five versions, each of which differs in the range of its activities and the estimated speed. An important advantage of such a function is the fact of interconnection exclusively between two units. Meanwhile, for example, wifi allows for the participation of outsiders.

How to transfer from a laptop on bluetooth

After the connection and setup phase has been reliably completed, users often have a direct question about how to transfer the material. In fact, the procedure is quite simple and usually does not cause difficulties.

First of all, you need to start working on both devices.
If the phone has not previously interacted with the basic invention, then you need to turn on visibility. This is done through the settings.
Now you can start pairing. To do this, select the file you want to transfer and right-click on it. Before you pops up an area where options will be displayed manipulations. Accordingly, it is necessary to elect a line with the name “send”. To further note the "bluetooth device". This process is over.

Indeed, there are additional applications that sometimes greatly facilitate the connection, as well as provide special features. On some prototypes of the netbook, they are embedded during development. But in their absence, you can install them yourself.

Why does not turn on / off bluetooth

Sometimes there are obstacles that do not allow to throw information from one place to another. But before embarking on serious steps, it is first recommended to navigate the situation. That is, find out the source of the origin of the problem and compare it with the necessary method of elimination. So, the following reasons can be highlighted:

Most likely, you have this part disabled. Most often this happens in people who often use it. This may be, for example, due to a non-emergency shutdown by means of function keys. Often people accidentally touch them: Fn and the corresponding component combination.
Also the case with its shutdown in win is likely. To verify this, you should refer to the value and check the correct position of the switch. Look carefully: you probably set the mode "in the plane."
Sometimes the inability to regulate the function is due to the inevitability of installing the utility. In some samples, such actions can be reproduced exclusively through them. Quick access is suitable for acer, HP - Wireless Assistant. In the world wide web you can find a large number of similar programs.
It is possible that communication without a wire is under the influence of BIOS. To find out the truth, you should go to the “Onboard Device Configuration” via “Advanced”. And it is there to view the information. Everything is done, respectively, through the system BIOS.

It is possible to conditionally distinguish between two categories: the problem of software kind and hardware faults. In the first moment, you will have to reset all available design indicators. Here it is worth understanding that the approach to each brand will be different. If the defect remains, it is advisable to make the firmware. In another situation, the inevitable approach to specialists, to the service center. Only there will they be able to identify and resolve the deficiency in the performance of your purchase.