How to connect headphones to the PS4 via the joystick

Headphones are an integral part of the gaming process, they help to fully immerse themselves in the game and at the same time not to interfere with others. Many users of the PS4 game console sometimes wonder how to connect a headset to the device and whether it is worth it. Many connect the console to the TV, and modern models of the device have pretty good full-time acoustics. However, firstly, not everyone uses a TV for playing, and secondly, extraneous noise can cause a lot of inconvenience to others.

How to connect wired headphones toPS4 through the joystick

Connecting the headset to the console using the joystick is the easiest option. There is a special 3.5 connector on the console joystick. It is located on the product’s case near the charging socket.

This connector is universal, supports the transmission of both audio and voice.

Phased Connection:

1. Headphones or a headset should be connected to the corresponding 3.5 jack on the PS4 joystick body.
2. In the console interface, set the connected headphones as an audio device for audio output. This requires:

• go to the console menu;
• go to "Settings";
• in the submenu find the item "Audio Devices";
• select - "Headphone output - all sounds."

If all the connection and setup steps are completed correctly, then the audio signal will be reproduced through the connected headset.

ATTENTION! If the device has a built-in microphone, the voice communication function will also be available.

How can I connect wireless headphones to the PS4

If wireless headphones are available, they can also be connected to a gamepad. Such an accessory will be more convenient to use.

The headset is connected to the console using Bluetooth technology. To make a connection, you must first purchase a Bluetooth receiver. He will receive an audio signal from the TV using a wire, and then transfer it to a wireless headset.

ATTENTION! Before purchasing a Bluetooth receiver, you should make sure that the TV has the necessary connectors.

You can purchase the necessary device in a specialized electronics store.

Phased Connection:

1. The receiver should be connected using an HDMI cable to the corresponding connector on the TV.
2. On the Bluetooth adapter and headphones, you must set the "Pairing" mode. This is done by pressing and holding the power button of the device. On average, the retention time is from 6 to 10 seconds, but depends on the particular product. Perform this procedure on devices that are turned off.
3. After the required time, turn on the receiver. If he began to blink with all the lights, then everything was done correctly and the adapter is paired with the headset.
4. Next, you need to turn on the headphones.
5. If everything is done correctly, then after about 2-3 seconds, both connected devices will detect each other, and the Bluetooth receiver will deliver sound to the headset.
6. In the TV settings, make the output to which the receiver is connected active.

If you have USB-bluetooth, you can connect using it:

• the adapter should be connected to the game console and perform the pairing procedure with the headset;
• go to the set-top box menu and set the required settings and find the item "Audio Devices" there;
• in the selected menu, set the headset as a device to which sound will be output.

Connecting is quite simple. Having spent a little time and effort, you can get the opportunity to completely immerse yourself in the gameplay and not disturb others.